Straight traveling conveyor belt is necessary to have good nights sleep.
Not always reached but with the help of PrimeTracker, you are on right track.
Most difficult installation is often reversible short distance conveyor .
Belt runs straight in one direction but misalign in reverse direction. There are means to overcome problems that often result in severe damages on belt and conveyor.
Actions to be taken:
- All rollers, roll stations, drive and return pulleys adjusted square to frame .
- Install PrimeTracker. You can install tracker on top of return strand or below return strand.
Geometry of PrimeTracker is developed and calculated enabling tracker to guide belt from lowest speed to 5 m/s.
17 mm rubber thickness and absence of wear gives PrimeTracker longevity.
Compare with steering of a car. From start to full speed you are able to steer.
Some trackers need links and arms to conduct what tracker is installed to do. PrimeTracker is complete and well designed and need no links to track.
This is an installation of Prime- Tracker on top of the return strand carried out by Alex of Kronovulk Vulk & Montage in Sweden.
Belt width 1200 mm
CC = 15 m
Picture: Alex Kosanovic
After installation belt runs straight in both directions says Alex.
Conveyor´ s best friend